Keeps web animation within the frame budget: compositor-only properties, motion off the main thread, React state traps, will-change and a symptom table.
$ npx skills add https://craftwork.design/skills/animation-performance -a claude-code -y
Installs into .claude/skills/animation-performance. Add -g for every project.
SKILL.md
Initial Response
When this skill is first invoked without a specific question, respond only with:
I'm ready to find out why your animation drops frames and make it smooth, my knowledge comes from Emil Kowalski's design engineering philosophy.
Do not provide any other information until the user asks a question.
A diagnostic skill. It does ONE thing: make motion land every frame. It does not pick easing or duration (that's animate), judge whether the motion should exist (that's review-animations), or handle React Native's threads (that's animate-expo). The question here is never "does it look right?" but "does each frame finish in time?".
Why This Matters
Imagine Sonner running at 30fps. Same easing, same durations, same code. Nobody would have cared. Performance isn't a polish pass applied after the motion is good; it's what lets good motion register at all.
Operating Posture
You are a design engineer who has shipped drawers, toasts, and dashboards to real devices and has had each of the traps below bite in production. You know the developer's MacBook is the least representative device the animation will ever run on.
"It's smooth on my machine." A fast laptop hides almost every problem in this skill. The bar is a mid-range phone, and on a 120Hz screen the budget is half what you think.
Sprinkling will-change and calling it fixed. It's the last step, not the first. Most jank is the wrong property or a busy main thread, and will-change fixes neither.
Hard Rules
transform and opacity by default. Anything else needs a reason. If a cheaper property produces the same visual, use it, even when the expensive one "seems fine".
Name the cause before changing code. Every fix you propose names which of the causes below it addresses. "Added will-change, seems smoother" is not a diagnosis.
Never conclude "it's fine" from a fast machine. Say which findings you verified from code and which need a recording on a real device.
Never transition: all. List the exact properties. all animates whatever changes next, including layout properties nobody intended to animate.
Don't trade correctness for a best-effort optimization. Hardware acceleration is something the browser may grant. Which properties you animate is something you control. Spend effort on the second.
The Symptom Table
Start here. Match what the user is seeing, then read the matching section.
Problem
Solution
Animation stutters
Animate transform/opacity, not width/height/top/margin
Shadow animation is choppy
filter: drop-shadow()
Jank only during navigation or loading
Move the animation to CSS or WAAPI so it runs off the main thread
Framer Motion x/y drops frames
Animate the full transform string
Hand-rolled animation drops frames in React
Write to ref.current.style, not state
Drag gets laggier as the list grows
Stop animating an inherited CSS variable; set transform directly
Blur transition lags (especially Safari)
Keep animated blur() under 20px
Unexpected properties animate
Replace transition: all with explicit properties
Element shifts 1px when motion starts or ends
will-change: transform, only once you see it
The Frame Budget
60fps is what the brain reads as fluid motion and matches most refresh rates. It gives the browser 16.7ms (1000/60) per frame. On a 120Hz screen, now most phones and many laptops, it's 8ms. Design against the smaller number.
For scale: a layout recalculation on a complex page can take over 100ms. That isn't one missed frame, it's a dozen.
Two things decide whether you stay inside the budget:
What you animate: how much work each frame costs.
Where it runs: whether that work can be blocked by everything else the page is doing.
What You Animate
To show a visual change, the browser runs up to three steps:
Layout: calculate the size and position of every element.
Paint: draw the page into layers.
Composite: put those layers on screen.
Every property enters this pipeline at one of three points, and the cost differs by an order of magnitude:
Tier
Properties
Cost
Composite only
transform, opacity, and in current Chrome/Firefox also filter, clip-path, background-color
Cheapest. Browsers promote these to their own layer.
Most expensive. One growing element can move everything around it.
transform and opacity change how an element looks, not where it sits in the document flow, so nothing needs re-measuring. Anything else in the composite tier needs testing across browsers and devices; support is uneven.
Swapping down a tier:
Instead of
Animate
width / height / padding to grow or shrink
scale()
top / left / margin to move
translate() (percentages are relative to the element's own size)
display / visibility swaps
opacity
box-shadow
filter: drop-shadow(…)
The last one is the one people miss. An animated shadow looks harmless but repaints the element every frame.
Two things follow:
Layout animations don't always drop frames. An absolutely positioned element, or one with few children, may animate padding without visible cost. But a padding animation and a scale() animation look the same, and only one of them can't regress on a slower device. Pick the one with no downside.
Layout properties also move the wrong things. Animating a sidebar's margin-left pushes the content beside it on every frame; translateX doesn't. For a dashboard next to an opening sidebar, that's the whole page re-laid-out 60 times a second.
Where It Runs
JavaScript always runs on the main thread. An animation driven by requestAnimationFrame competes with everything else the browser is doing. When the main thread is busy, the animation's code can't run and the frame is late.
Web Animations API (element.animate(), Motion's animate())
Can be hardware-accelerated
CSS transitions and keyframes
Can be hardware-accelerated
Hardware acceleration means the animation runs off the main thread, so it stays smooth no matter what JavaScript is doing. "JS" and "main thread" aren't synonyms: a JS library that hands off to WAAPI can be accelerated, a rAF loop can't.
Reliably accelerated: transform and opacity. Gaining support: filter, clip-path, background-color.
The pattern to watch for is motion that runs while the page is doing heavy work: page transitions, tab indicators during navigation, anything that fires alongside data fetching or hydration. Vercel's dashboard animated its active tab indicator with a Framer Motion shared layout animation. The browser was loading the next page at exactly that moment, so it dropped frames. Moving it to a CSS animation fixed it.
Framer Motion can be accelerated, but only when the transform is a string:
<motion.div animate={{ x: 100 }} /> // main thread, can jank
<motion.div animate={{ transform: "translateX(100px)" }} /> // hardware-accelerated
The x, y, scale, rotate shorthands are implemented with CSS variables, and animated CSS variables aren't accelerated. The shorthands read better, so keep them by default and switch to the string form when the animation has to survive a busy main thread.
Acceleration is progressive enhancement. Browsers silently decline it under conditions that change between versions; Chrome, for example, historically didn't accelerate percentage-based transforms. That's not a reason to stop using translateY(100%). Percentages are the right call for elements of unknown size (it's how Sonner and Vaul position toasts and drawers), and correctness beats a best-effort optimization.
React: Don't Animate Through State
Animation libraries animate outside React's render cycle, so they're fine. The trap is a hand-rolled animation that calls setState every frame: the component re-renders every 16.7ms and the render alone blows the budget.
// Drops frames: one re-render per frame
setY(nextY);
// Smooth: no re-render
ref.current.style.transform = `translateY(${nextY}px)`;
// or with a motion value: y.set(nextY)
Look for state updates inside requestAnimationFrame, pointermove, scroll, or drag handlers.
Two Traps That Look Correct
Both of these use transform and still drop frames.
Inherited CSS variables. Vaul's drag got laggy once a drawer held more than ~20 items, with no re-renders involved. The drag distance was written to a CSS variable that translateY() read:
// Recalculates styles for every descendant, every frame
const style = { "--swipe-amount": `${draggedDistance}px` };
// Only touches this element
const style = { transform: `translateY(${draggedDistance}px)` };
CSS variables inherit, so changing one on a parent triggers style recalculation for every child. The more content, the slower each frame. Suspect this whenever a transform animation degrades as content grows. It's the same reason Framer Motion's shorthands aren't accelerated.
Blur.filter: blur() gets expensive fast, especially in Safari. Keep animated blur under 20px; 2–5px is enough to soften a crossfade.
will-change
A browser can hand an animation from the CPU to the GPU mid-flight, and that hand-off can make the element shift by a pixel at the start or end. will-change promotes the element up front so no hand-off happens:
.drawer {
will-change: transform;
}
Add it only once you see the shift or measured dropped frames. Browsers already promote elements animating transform or opacity, so on the common path it does nothing, and every promoted layer costs GPU memory. Put it on the element that animates, never on * or large containers.
Where it earns its place is an expensive paint, like a large blurred or filtered element. Promote it and keep the layer small; a small layer is cheaper to composite than a full-screen one.
Should You Avoid JS Animation?
No. Main-thread animation only suffers when the page is busy during it, which is rare, and now you know how to spot it.
Framer Motion gives you things CSS can't: real springs, shared layout animations, exit animations for unmounted components, momentum gestures. The question is whether you need those, not whether JS animation is allowed.
The working split: CSS for simple motion and anything that plays while the page is busy; Framer Motion for complex, interruptible, gesture-driven motion.
Workflow
Phase 1: Find what animates
List every animation in scope with its driver and properties:
Element
Driver
Properties
Plays during
Tab indicator
motion/reactlayoutId
layout
route change
Drawer
CSS transition
transform
user drag
Card hover
CSS transition
all
hover
Expand transition: all and Motion shorthands into what they actually animate.
Phase 2: Diagnose
Work down this list. It's ordered by how often each one is the cause:
Which properties animate? Anything other than transform/opacity is the first suspect: layout properties first, then box-shadow and border-radius, which don't look like layout and are easy to miss.
Does the jank coincide with the page being busy? Navigation, fetching, hydration, a long task. Move the animation to CSS or WAAPI.
Is React re-rendering per frame? State updates in rAF, pointer, or scroll handlers.
Does it get worse as content grows? An inherited CSS variable, or too many nodes animating at once.
Is a CSS variable animated at all? Directly, or through Motion's x/y/scale.
Any animated blur() above 20px?
Still shifting or stuttering? Now add will-change: transform to the animating element.
Confirm with a recording, not by feel: the DevTools Performance panel for dropped frames and long tasks, the Animations panel to slow motion down. Profile on a real mid-range phone over remote debugging. CPU throttling on a desktop models a slow CPU, not a weak GPU or a small memory budget.
Phase 3: Report
For each finding:
**[Element]**: `file.tsx:42`
Cause: [which of the causes above]
Before: `transition: all 200ms` (animates `padding`, triggers layout)
After: `transition: transform 200ms` with `scale(0.97)`
Verified: from code / needs a device recording
Order findings by cost: layout before paint, busy-main-thread before idle. Then stop. Apply fixes when asked.
